Advantages of a Pool Heat Pump

What is inverter pool heat pump technology?

Inverter technology means that a heat pump can adjust its electricity consumption to the actual needs of the pool. The components (compressor and fans) adapt their operating intensity to deliver only the power needed to heat the water. As a result, the pool heat pump will consume less electricity (a significant advantage). An inverter compressor with efficient heat exchangers will give the heat pump a higher COP. This COP (Coefficient of Performance) defines the efficiency of the heat pump. A high COP means that the heat pump is optimised and efficient.

How does a full-inverter pool heat pump work?

Full-Inverter pool heat pumps operate smartly: once the temperature has been set, the heat pump will automatically the output adjust to reach that temperature. This is due to an algorithm that can process pool temperature data to determine the level of intensity at which the pump should operate.

What advantages are there in using Inverter Pool Heat Pumps?

Reduction in electricity consumption

Without doubt the first argument for opting for such technology: the significant reduction in electricity consumption. Over a year, the saving is between 30 and 40% compared to a conventional heat pump. The higher the COP, the lower your electricity bill.

Operation that adapts to your use

Thanks to its intelligent operation, the heat pump takes into account the temperature of the water and the ambient air to regulate itself. It therefore operates automatically and adjusts to your needs.

At the beginning of the season, the temperature rises quickly.
At the height of the season, it will adjust and run at low speed to maintain the water at the right temperature.

Low noise levels

Due to its low speed operation, the noise level of the heat pump is considerably low. The choice of fans (e.g. variable speed brushless technology) also contributes to this noise reduction. This is a significant advantage in small spaces where the heat pump is placed close to the pool, or where it does not disturb the neighbourhood.

Low impact R32 refrigerant

Pool heat pumps with full inverter technology use R32 refrigerant. In addition to inverter technology, the use of R32 refrigerant, which is more efficient and environmentally friendly than the traditionally used R410A, results in a lower impact.

The benefits of a full Inverter heat pump compared to a traditional heat pump:

The main difference between a full-Inverter heat pump and a conventional heat pump is the start-up of the heat pump:

A conventional heat pump (on/off) starts up using all its power, and may cause some noise pollution. It switches off once the set temperature has been reached. It will restart as soon as it is necessary to correct a temperature difference (even for 1°C). It should be noted that frequent start/stop operation consumes a lot of energy and tires out the components.
An inverter pool heat pump, on the other hand, starts up gradually and does not cause a peak in consumption. When the set water temperature is almost reached, it activates its idle mode without switching off. It then simply adjusts its operating intensity to keep the water at the desired temperature.

An inverter pool heat pump is, of course, a little more expensive at the outset, but it offers good guarantees in the long term. In particular, its life span is extended. Because the full inverter heat pump does not generate peak loads, the components do not run at full speed. As a result, parts wear out more slowly and the heat pump has a longer service life.